HK K0

Gear pump, size 0 K0

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Cover connection, suction side G 1/4"
Flange connection, pressure side Ø 5.00
Material Housing: Aluminium
Front flange, end cover: Aluminium

Description

European standard pump – hole pattern 66 – 22 dia. – flat splined shaft

Article Table

Product Name Direction of rotation p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min VFU (ccm) cm³ Weight kg p2max. bar
Product Name Direction of rotation p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min VFU (ccm) cm³ Weight kg p2max. bar
HK K 01 anti-clockwise rotating 220 56.0 9000 260 700 0.25 0.41 240
HK K 02 anti-clockwise rotating 220 58.0 9000 260 700 0.45 0.42 240
HK K 03 anti-clockwise rotating 220 59.0 9000 260 700 0.57 0.43 240
HK K 04 anti-clockwise rotating 220 60.0 9000 260 700 0.76 0.44 240
HK K M1 anti-clockwise rotating 220 55.0 9000 260 700 0.17 0.40 240
VFU = conveying volume per revolution
p1 = continuous pressure
p2 = working pressure
p3 = maximum pressure

Order hints

Further pump versions available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.