HK K1

Gear pump, size 1 K1

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Cover connection, suction side G 3/8”
Design housing type BH (attachment top right-hand, bottom left-hand)
Flange connection, pressure side Ø 9.25 (Quadring 9.25x1.78 NBR 70Sh)
Material Housing: Aluminium
Front flange, end cover: Aluminium

Description

European standard pump – hole pattern 40 x 40 – dia. 32 – flat splined shaft

Article Table

Product Name Direction of rotation p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min VFU (ccm) cm³ Weight kg p2max. bar
Product Name Direction of rotation p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min VFU (ccm) cm³ Weight kg p2max. bar
HK K 10 anti-clockwise rotating 220 77.1 6000 280 700 0.92 0.80 240
HK K 11 anti-clockwise rotating 220 78.0 6000 290 700 1.17 0.83 250
HK K 12 anti-clockwise rotating 220 79.5 6000 290 700 1.56 0.85 250
HK K 13 anti-clockwise rotating 220 81.5 6000 290 700 2.08 0.89 250
HK K 14 anti-clockwise rotating 220 83.5 6000 290 700 2.60 0.90 250
HK K 15 anti-clockwise rotating 220 85.5 6000 270 700 3.12 0.93 240
HK K 16 anti-clockwise rotating 200 87.5 6000 235 700 3.64 0.96 210
HK K 17 anti-clockwise rotating 180 89.5 6000 205 700 4.16 0.98 190
HK K 18 anti-clockwise rotating 150 92.5 6000 175 700 4.94 1.01 160
HK K 19 anti-clockwise rotating 120 96.0 5000 145 700 5.85 1.08 130
HK K 19A anti-clockwise rotating 100 97.5 5000 130 700 6.50 1.09 110
HK K 20 anti-clockwise rotating 80 102.5 5000 120 700 7.54 1.08 95
HK K 21 anti-clockwise rotating 70 111.5 4000 110 700 9.88 1.08 90
VFU = conveying volume per revolution
p1 = continuous pressure
p2 = working pressure
p3 = maximum pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.