HK K1 CON

Gear pump, size 1 K1 CON



Properties

Design housing type BH (attachment top right-hand, bottom left-hand)
Material Front flange, end cover: Aluminium, Housing: Aluminium
Cover connection, suction side G 3/8”
Flange connection, pressure side Ø 9.25 (Quadring 9.25x1.78 NBR 70Sh)

Description

European standard pump – hole pattern 40 x 40 – dia. 32 – taper 1:8

Article Table

Product Name VFU (ccm) cc p1 max. bar p2 max. bar p3 max. bar A mm Direction of rotation Speed min. rpm Speed max. rpm Weight kg
Product Name VFU (ccm) cc p1 max. bar p2 max. bar p3 max. bar A mm Direction of rotation Speed min. rpm Speed max. rpm Weight kg
HK K 10 CON 0,92 220 240 280 77,1 anti-clockwise rotating 700 6000 0,80
HK K 11 CON 1,17 220 250 290 78,0 anti-clockwise rotating 700 6000 0,83
HK K 12 CON 1,56 220 250 290 79,5 anti-clockwise rotating 700 6000 0,85
HK K 13 CON 2,08 220 250 290 81,5 anti-clockwise rotating 700 6000 0,89
HK K 14 CON 2,60 220 250 290 83,5 anti-clockwise rotating 700 6000 0,90
HK K 15 CON 3,12 220 260 300 85,5 anti-clockwise rotating 700 6000 0,93
HK K 16 CON 3,64 220 260 300 87,5 anti-clockwise rotating 700 6000 0,96
HK K 17 CON 4,16 220 260 300 89,5 anti-clockwise rotating 700 6000 0,98
HK K 18 CON 4,94 220 260 300 92,5 anti-clockwise rotating 700 6000 1,01
HK K 19 CON 5,85 220 260 300 96,0 anti-clockwise rotating 700 5000 1,08
HK K 19 A CON 6,50 220 260 300 97,5 anti-clockwise rotating 700 5000 1,09
HK K 20 CON 7,54 210 230 260 102,5 anti-clockwise rotating 700 5000 1,10
HK K 21 CON 9,88 190 210 230 111,5 anti-clockwise rotating 700 4000 1,20
VFU = conveying volume per revolution - p1 = continuous pressure - p2 = working pressure - p3 = maximum pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.