Tool for line break safety valves


Surface galvanised
Material Steel
use for valve type HK V1 601


With this tool line break safety valves can be screwed into the corresponding housing.


For applications with greater shocks and vibration the valve must be secured with Loctite when screwing.

Article Table

Product Name L mm Ø A mm Ø B mm Ø C mm Ø D mm Ø F mm Weight kg
Product Name L mm Ø A mm Ø B mm Ø C mm Ø D mm Ø F mm Weight kg
HK LBS TOOL 1/4 68,0 15,9 11,5 6,3 8,0 2,35 0,06
HK LBS TOOL 3/8 68,0 15,9 14,8 6,3 10,0 3,25 0,08
HK LBS TOOL 1/2 76,0 24,9 18,7 8,0 11,9 4,35 0,17
HK LBS TOOL 3/4 76,0 24,9 23,5 8,0 16,0 5,95 0,25


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.