Level contact for level/temperature switch

  • Image_1 Image_1
  • Image_2 Image_2


Contact distance min. 40 mm
Contact load max. 10 VA
Scope of supply 2 x Befestigungsschraube Kunststoff
Switching current max. 0.5 A
Use for Level-Temperature Switches HK 64EJ


For mounting on contact strip of level-temperature switch HK64EJ
Level contacts can be installed as NC or NO contacts (turn by 180° during installation)
Use different colours when using 2 or 3 contacts


Installation and assembly must be carried out by qualified staff. Level contacts or temperature sensors must be connected to the contact plate clean and free of oil.

Article Table

Product Name Voltage Weight kg Colour
Product Name Voltage Weight kg Colour
HK L1 K101 EJ max. 24 V 0.01 green
HK L2 K102 EJ max. 24 V 0.01 yellow
HK L3 K103 EJ max. 24 V 0.01 red


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.