HK MAP

MAP pressure switch

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Connection 4-hole Flange 31x31 mm
Design changeover contact
Material Steel
Max. operating pressure max. 630 bar
Scope of supply incl. set of screws
complete with plug
max. current consumption 3 A
protection class IP 65

Description

Piston pressure switch
Repetition accuracy less than or equal to 1% of set value
Electric switching rate min. 1 million operating cycles
Switching hysteresis approx. 2.5 to 10%, depending on pressure range
Setting via scale
Universal connection possibilities by separate adapters/connection plates

Hints

The O-ring (NBR 70° Shore A) for the pressure port can be ordered as spare part separately under the following article number: 1 piece OR5.28-1.78

Article Table

Product Name Pressure setting range max. bar Pressure setting range min. bar Weight kg
Product Name Pressure setting range max. bar Pressure setting range min. bar Weight kg
HK MAP 040 40 5 0.500
HK MAP 080 80 7 0.500
HK MAP 160 160 10 0.500
HK MAP 320 320 30 0.500
HK MAP 630 630 50 0.500

Order hints

Please order adapters and mounting plates separately!

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.