HK MH 2025

Digital gauge set



Properties

Scope of supply 1 measuring device HK MH 2025, 1 USB-power supply unit 5 VDC, 500 mA, 2 MINIMESS® direct connectors for pressure sensors, 2 NiMH rechargeable batteries, 2 pressure sensors with moulded cable (length 2.5 m), pressure ranges, see table, Operating manual, Plastic case, Software
Temp. range -20 °C to +70 °C

Description

Compact measuring device
Direct handling by 5 softkeys
2 channels for industrial sensors (optional 0-20 mA, 4-20 mA, 0-10 V, 2-10 V, frequency, counter)
Calculation of differential pressure or power from 2 channels
ISDS automatic sensor detection
LCD graphic display with switched-mode backlight and automatic display adjustment
2,0 MB memory (5 series of measurements with 120,000 measured values)
Scanning rate selectable in 5 stages between 1 ms and 10 s
Display rate selectable between 0,5 ms and 10 ms
High-speed data transmission to the PC via USB interface
With software HYDROlink Base
Lightweight plastic housing with battery compartment for commercially available NiMH rechargeable batteries
Case dimensions: W=235 mm / L=185 mm / H=48 mm

Article Table

Product Name Pressure sensors included Weight kg
Product Name Pressure sensors included Weight kg
HK MH2025 400 400 2x 0 - 400 bar 3,5
HK MH2025 060 600 1x 0 - 60 bar/1x 0 - 600 bar 3,5

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.