HK ML32

PTO shaft gearboxes


Properties

Material Aluminium housing
Use For European standard gear pumps BG2

Description

Aluminium housing

Hints

Direction of rotation:
Pump anti-clockwise rotating - PTO shaft clockwise rotating
Pump clockwise rotating, PTO shaft anti-clockwise rotating

Article Table

Product Name n1 max. rpm M1 max. N-m n2 max. rpm M2 max. N-m n2/n1 Connection, drive side Weight kg
Product Name n1 max. rpm M1 max. N-m n2 max. rpm M2 max. N-m n2/n1 Connection, drive side Weight kg
HK ML32 11 3.8 540 159 2052 42 3,8 Profile shaft - 1.3/8" - DIN 9611 4,3
HK ML32 21 3.8 540 159 2052 42 3,8 Hollow shaft - 1.3/8" - DIN 9611 4,3
HK ML32 31 3.8 540 159 2052 42 3,8 Hollow shaft with locking - 1.3/8" - DIN 9611 4,3
M1 = max. input torque - M2 = max. output torque - n1 = max. input speed - n2 = max. output speed

Order hints

A coupling hub BF2T is required for the connection between pump and gearbox.
Gear unit is supplied without oil (SAE 85W-90 is recommended)

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.