HK ML52

PTO shaft gearboxes

  • Image_1 Image_1

Properties

Material Aluminium housing
Use For European standard gear pumps BG3

Hints

Direction of rotation:
Pump anti-clockwise rotating - PTO shaft of the gearbox clockwise rotating
Pump clockwise rotating - PTO shaft of the gearbox anti-clockwise rotating

Article Table

Product Name M1 max. Nm Weight kg n2max. r/min Connection, drive side n2/n1 M2max. Nm n1max. r/min
Product Name M1 max. Nm Weight kg n2max. r/min Connection, drive side n2/n1 M2max. Nm n1max. r/min
HK ML52 11 3.8 437 7.8 2057 Profile shaft - 1.3/8" - DIN 9611 04 115 540
HK ML52 21 3.8 437 7.8 2057 Hollow shaft - 1.3/8" - DIN 9611 04 115 540
HK ML52 31 3.8 437 7.8 2057 Hollow shaft with locking - 1.3/8" - DIN 9611 04 115 540
M1 = max. input torque
M2 = max. output torque
n1 = max. input speed
n2 = max. output speed

Order hints

Gear unit is supplied without oil (SAE 85W-90 is recommended)
A coupling hub BF3 is required for the connection between pump and gearbox.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.