HK MPS 1

Spin-on filter type 1



Properties

Design A10: with inorganic filter (10 μm), absolute filtration, as return filter, P10: paper filter (10 μm), nominal filtration, with bypass valve 1.75 bar, without clogging indicator
Material Filter head in aluminum, Gasket: NBR
Operating pressure max. 12 bar

Description

Spin-on filters for pipeline installation
Pressure differential for paper filter element (P) max. 4 bar
Pressure differential for filter inorganic element (A) max. 4 bar
Design (Qmax.) for medium ISO VG 46
at 50°C (30 mm2/s) at Δptot = 0.4 bar

Hints

For utilization as a suction filter a suction filter head FI SP S FK *** must be used.

Article Table

Product Name Filter mesh size μm Filter area Line connection Q max. L/min A mm B mm C mm D mm E mm Weight kg
Product Name Filter mesh size μm Filter area Line connection Q max. L/min A mm B mm C mm D mm E mm Weight kg
HK MPS 050 RG1 A10 10,0 1900 G 3/4” 48 180 22 200 95 96 1,0
HK MPS 050 RG1 P10 10,0 2240 G 3/4” 56 180 22 200 95 96 1,0
HK MPS 070 RG1 A10 10,0 3160 G 3/4” 53 248 22 268 95 96 1,3
HK MPS 070 RG1 P10 10,0 4140 G 3/4” 65 248 22 268 95 96 1,3
HK MPS 100 RG1 A10 10,0 3950 G 1.1/4” 110 241 30 286 133 129 2,2
HK MPS 100 RG1 P10 10,0 4300 G 1.1/4” 149 241 30 286 133 129 2,2
HK MPS 150 RG1 A10 10,0 5390 G 1.1/4” 115 286 30 311 133 129 2,3
HK MPS 150 RG1 P10 10,0 5760 G 1.1/4” 156 286 30 311 133 129 2,3
A10 with inorganic filter (10 μm), absolute filtration - P10 paper filter (10 μm), nominal filtration - Qmax - max intake volumetric flow

Order hints

Other filter materials and filters for other types of oil, viscosities or temperatures available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.