HK MPS 2

Spin-on filter type 2

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design as return filter
with bypass valve 1.75 bar, without clogging indicator
A10: with inorganic filter (10 μm), absolute filtration
P10: paper filter (10 μm), nominal filtration
Max. operating pressure Max. 12 bar

Description

Spin-on filters for pipeline installation
Pressure differential for paper filter element (P) max. 4 bar
Pressure differential for filter inorganic element (A) max. 4 bar
Design (Qmax.) for medium ISO VG 46 <br>at 50°C (30 mm2/s) at Δptot = 0.4 bar

Hints

For utilization as a suction filter a suction filter head FI SP S FK *** must be used.

Article Table

Product Name D mm E mm Weight kg C mm A mm Filter area Line connection Q max. l/min
Product Name D mm E mm Weight kg C mm A mm Filter area Line connection Q max. l/min
HK MPS 200 RG1 A10 140 129 4.0 241 216 2 x 3160 cm2 G 1.1/2” 220
HK MPS 200 RG1 P10 140 129 4.0 241 216 2 x 4300 cm2 G 1.1/2” 282
HK MPS 250 RG1 A10 140 129 4.2 286 261 2 x 5390 cm2 G 1.1/2” 250
A10 with inorganic filter (10 μm), absolute filtration
P10 paper filter (10 μm), nominal filtration
Qmax - max intake volumetric flow

Order hints

Other filter materials and filters for other types of oil, viscosities or temperatures available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.