HK MPS R/S

Filter head for spin-on filter MPS


Properties

Material Aluminium

Description

With these filter heads, spin-on filters can be used as return flow filters (R) or suction filters (S)
Opening pressure of bypass valve for return filter (R): 1.75 bar
Opening pressure of bypass valve for suction filter (S): 0.3 bar

Article Table

Product Name Line connection Design suitable for filter type MPS Weight kg
Product Name Line connection Design suitable for filter type MPS Weight kg
HK MPS 050 070 RG1 G 3/4” as return filter 050-070 0,36
HK MPS 100 150 RG1 G 1.1/4” as return filter 100-150 1,00
HK MPS 200 250 RG1 G 1.1/2” as return filter 200-250 1,22
HK MPS 300 350 RG1 G 1.1/2” as return filter 300-350 2,86
HK MPS 050 070 SG1 G 3/4” as suction filter 050-070 0,36
HK MPS 100 150 SG1 G 1.1/4” as suction filter 100-150 1,00
HK MPS 200 250 SG1 G 1.1/2” as suction filter 200-250 1,22
HK MPS 300 350 SF1 1.1/2" SAE 3000 PSI/M as suction filter 300-350 2,86

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.