HK OLM C

Diaphragm accumulator, connection C



Properties

Connections Oil side type C - female thread and male thread
Design Vertical installation position, gas side top
Temp. range Typ 1: -10 °C to +80 °C, Typ 2: -30 °C to +110 °C
Material Diaphragm: NBR standard version, Typ 2: Membrane ECO
Operating pressure max. 350 bar

Hints

CE mark for diaphragm accumulators >1.0 l gas volume
Betriebsdruck 100 bis 350 bar, min. Betriebsdruck muss 10 % über Gasfülldruck liegen, max. Gasfülldruck 130 bar

Article Table

Product Name Type Gas volume l L p max. bar pma: p0 pmax - pmin bar A mm B mm Ø D mm F AF mm Weight kg
Product Name Type Gas volume l L p max. bar pma: p0 pmax - pmin bar A mm B mm Ø D mm F AF mm Weight kg
HK OLM 0.5 210 C 1 0,500 210 8:1 175 163 33 106 G 1/2” 41 2,0
HK OLM 0.75 210 C 1 0,750 210 8:1 175 180 33 124 G 1/2” 41 2,9
HK OLM 0.75 210 ECO C 2 0,750 210 8:1 175 180 33 124 G 1/2” 41 2,9
HK OLM 0.75 350 ECO C 2 0,750 350 8:1 150 169 18 131 G 1/2” 41 3,5
HK OLM 1.0 210 C 1 1,000 210 8:1 170 191 33 136 G 1/2” 41 3,5
HK OLM 1.4 140 C 1 1,400 140 8:1 120 202 33 147 G 1/2” 41 4,2
HK OLM 1.4 210 C 1 1,400 210 8:1 120 202 33 148 G 1/2” 41 4,2
HK OLM 1.4 210 ECO C 2 1,400 210 8:1 120 202 33 148 G 1/2” 41 4,2
HK OLM 1.4 350 ECO C 2 1,400 350 8:1 150 220 33 160 G 1/2” 41 7,0
Typ 1: Standard - Typ 2: low temperature version - p0 = Gas charge pressure - pmax - pmin = Admissible pressure fluctuation of the accumulator

Order hints

The accumulators will be delivered uncharged from stock. N2-chargings according to customer requirements arise separate costs.
Bei Bedarf bitte Kontermutter HK MS M33-15 mitbestellen.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.