HK PAM 014 T

Manual pump for tank installation

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Lieferumfang incl. seal and screw set
Material Housing: cast iron, inner parts steel

Hints

Die Druckbegrenzungsventile müssen auf den Anwendungsfall eingestellt werden.
Einstellbereich Druckbegrenzungsventil 20 - 300 bar (bei Vdh 12 ccm), Einstellbereich Druckbegrenzungsventil 20 - 300 bar (bei Vdh 25 ccm), Einstellbereich Druckbegrenzungsventil 20 - 250 bar (bei Vdh 45 ccm)

Article Table

Product Name p max. bar Druck (30)* bar Gewinde Gewicht kg Vdh cm³ Ausführung
Product Name p max. bar Druck (30)* bar Gewinde Gewicht kg Vdh cm³ Ausführung
HKPAM0141200 380 bar 160 bar 1x 3/8" AG 2.85 kg 12 cm³ with manual drain
HKPAM0141201 380 bar 160 bar 1x 3/8" AG 3.00 kg 12 cm³ with manual drain and pressure relief valve
HKPAM0142500 350 bar 100 bar 1x 3/8" AG 2.95 kg 25 cm³ with manual drain
HKPAM0142501 350 bar 100 bar 1x 3/8" AG 3.00 kg 25 cm³ with manual drain and pressure relief valve
HKPAM0144500 280 bar 80 bar 1x 3/8" AG 3.15 kg 45 cm³ with manual drain
HKPAM0144501 280 bar 80 bar 1x 3/8" AG 3.30 kg 45 cm³ with manual drain and pressure relief valve
Vdh = conveying volume per double stroke, Pressure (30)= pressure with hand force 30 daN with standard lever

Order hints

Achtung! Handhebel HKPAM0290000 mitbestellen!

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.