HK PAM 015 T

Manual pump for tank installation with directional control valve

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Material Housing: cast iron, inner parts steel
Scope of supply incl. seal and screw set

Hints

The pressure relief valves must be set according to the application.
Adjustment range pressure-relief valve 20 - 300 bar (at Vdh 12 ccm)
Adjustment range pressure-relief valve 20 - 300 bar (at Vdh 25 ccm)
Adjustment range pressure-relief valve 20 - 250 bar (at Vdh 45 ccm)

Article Table

Product Name pmax. bar Pressure (30)* bar Thread Weight kg Vdh cm³ Version
Product Name pmax. bar Pressure (30)* bar Thread Weight kg Vdh cm³ Version
HK PAM 015 1200 380 160 2 x 3/8" AG 2.85 12 with 4/3-way valve
HK PAM 015 1202 380 160 2 x 3/8" AG 3.00 12 with pressure relief valve and 4/3-way valve
HK PAM 015 2500 350 100 2 x 3/8" AG 2.95 25 with 4/3-way valve
HK PAM 015 2502 350 100 2 x 3/8" AG 3.10 25 with pressure relief valve and 4/3-way valve
HK PAM 015 4500 280 80 2 x 3/8" AG 3.15 45 with 4/3-way valve
HK PAM 015 4502 280 80 2 x 3/8" AG 3.30 45 with pressure relief valve and 4/3-way valve
Vdh = conveying volume per double stroke
Pressure (30)= pressure with hand force 30 daN with standard lever

Order hints

Caution! Remember to order the hand lever HKPAM0290000!

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.