HK PCFC

2-way directional flow control valve PCFC



Properties

Design pressure-compensated
Operating pressure max. 300 bar

Description

Setting via setscrew
max. deviation: 5%
Only adjust valves in depressurized state!

Hints

These valves must be set according to the application.
Tightening torque for valve size 08 with Alu housing: 34-41 Nm
Tightening torque for valve size 08 with Steel housing: 47-54 Nm
Tightening torque for valve size 10 with Alu housing: 47-54 Nm
Tightening torque for valve size 10 with Steel housing: 74-81 Nm
Tightening torque for valve size 12 with Alu housing: 74-81 Nm
Tightening torque for valve size 12 with Steel housing: 95-102 Nm

Article Table

Product Name Q min. L/min Q max. L/min A mm B mm Screw-in housing Screw-in thread Setting range with Qon min. L/min Setting range with Qon max. L/min Weight kg
Product Name Q min. L/min Q max. L/min A mm B mm Screw-in housing Screw-in thread Setting range with Qon min. L/min Setting range with Qon max. L/min Weight kg
HK PCFC 08 NS0 02 8 22 41,0 28,0 HK GEH 38 C 0820 SAE 8/2 3/4"-16UNF-2B 4,0 8,0 0,17
HK PCFC 08 NS0 03 11 22 41,0 28,0 HK GEH 38 C 0820 SAE 8/2 3/4"-16UNF-2B 5,5 11,0 0,17
HK PCFC 08 NS0 05 19 22 41,0 28,0 HK GEH 38 C 0820 SAE 8/2 3/4"-16UNF-2B 9,5 19,0 0,17
HK PCFC 10 NS0 08 30 45 48,3 32,5 HK GEH 38 C1020 SAE 10/2 7/8"-14UNF-2B 15,0 30,0 0,17
HK PCFC 12 NS0 15 57 90 49,8 44,5 HK GEH 34 C1220 SAE 12/2 1.1/16"-12UNF-2B 28,5 57,0 0,17
HK PCFC 12 NS0 20 76 90 49,8 44,5 HK GEH 34 C1220 SAE 12/2 1.1/16"-12UNF-2B 38,0 76,0 0,17
Qein - intake volumetric flow - Qmax - max intake volumetric flow - Qmin - min. volumetric flow for control function

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.