HK PFE

Vane pump



Properties

Design clockwise rotating

Description

Constant displacement pumps with 12 vanes in rotor insert
Hydraulic axial backlash compensation for high-pressure operation
Low noise level

Hints

Performance data at 1500 rpm with hydraulic oil with a viscosity of 24 mm2/s and 40 °C

Article Table

Product Name VFU cc Pressure max. bar n min. rpm n max. rpm Qmax at 7 bar max. L/min Qmax at 210 bar max. L/min Ø shaft mm A mm SAE pressure connection SAE suction connection D mm L mm M mm Q mm Weight kg
Product Name VFU cc Pressure max. bar n min. rpm n max. rpm Qmax at 7 bar max. L/min Qmax at 210 bar max. L/min Ø shaft mm A mm SAE pressure connection SAE suction connection D mm L mm M mm Q mm Weight kg
HK PFE 31 016 1DT 16,5 210 800 2800 23 16 19,05 134,5 3/4" 1.1/4" 82,5 106 73,0 11,1 9,00
HK PFE 31 022 1DT 21,6 210 800 2800 30 23 19,05 134,5 3/4" 1.1/4" 82,5 106 73,0 11,1 9,00
HK PFE 31 028 1DT 28,0 210 800 2800 40 33 19,05 134,5 3/4" 1.1/4" 82,5 106 73,0 11,1 9,00
HK PFE 31 036 1DT 35,6 210 800 2800 51 43 19,05 134,5 3/4" 1.1/4" 82,5 106 73,0 11,1 9,00
HK PFE 41 045 1DT 45,0 210 800 2500 64 57 22,22 160,0 1" 1.1/2" 101,6 146 107,0 14,3 14,00
HK PFE 41 056 1DT 55,8 210 800 2500 80 72 22,22 160,0 1" 1.1/2" 101,6 146 107,0 14,3 14,00
HK PFE 41 070 1DT 69,9 210 800 2500 101 91 22,22 160,0 1" 1.1/2" 101,6 146 107,0 14,3 14,00
HK PFE 41 085 1DT 85,3 210 800 2000 124 114 22,22 189,0 1" 1.1/2" 101,6 146 107,0 14,3 14,00
HK PFE 51 150 1DT 150,0 210 800 1800 215 197 31,75 186,5 1.1/4" 2" 127,0 181 143,5 17,5 26,00
HK PFE 52 090 3DT 90,0 250 1000 2000 128 111 34,88 189,0 1.1/4" 2" 127,0 181 143,5 17,5 32,14
HK PFE 52 110 3DT 109,6 250 1000 2200 157 138 34,88 189,0 1.1/4" 2" 127,0 181 143,5 17,5 32,14
HK PFE 52 129 3DT 129,2 250 1000 2200 186 163 34,88 189,0 1.1/4" 2" 127,0 181 143,5 17,5 32,14
VFU = conveying volume per revolution - n = speed

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.