HK PK

Pump carrier PK

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design combinable with coupling HK ROTEX AF
Material Aluminium
Use For axial piston pump HK PVPC and vane pump HK PFE

Description

Centring for motor and pump shaft

Article Table

Product Name A mm Pump Ø C mm Flange for pump connection Motor Ø D mm Weight kg Ø B mm Ø F mm Weight kg Ø E mm Ø D mm
Product Name A mm Pump Ø C mm Flange for pump connection Motor Ø D mm Weight kg Ø B mm Ø F mm Weight kg Ø E mm Ø D mm
HK PK 350 040 400 188.00 HKPFE41 / HKPVPC30 350 Two-hole flange 146 BG160 - - 300 260 2.9 225 101.6
HK PK 350 060 400 204.00 HKPFE41 / HKPVPC30 350 Two-hole flange 146 BG160/180 - - 300 260 3.0 230 101.6
HK PK 350 060 500 204.00 HKPVPC50 350 Two-hole flange 181 BG180 - - 300 260 3.0 230 127.0
HK PK 350 101 900 228.00 HKPFE52 350 Two-hole flange 181 BG180 - - 300 260 3.3 248 127.0
HK PK 400 040 400 204.00 HKPVPC40 400 Two-hole flange 146 BG200 - - 350 300 5.3 230 101.6
HK PK 400 040 600 204.00 HKPVPC50 400 Two-hole flange 181 BG200 - - 350 300 5.1 230 127.0
HK PK 400 050 700 228.00 HKPFE52 400 Two-hole flange 181 BG200 - - 350 300 5.7 279 127.0
HK PK 450 032 300 262.00 HKPVPC50 450 Two-hole flange 181 BG225 - - 400 350 6.6 315 127.0
HK PK 300 02 08 137.00 BG3/shaft 1:8 300 128 x 98 BG132 234 1.90 265 - - - -

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.