HK PVPC

PVPC axial piston pump

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Description

Pumps with variable delivery rate
Low noise level
Manually adjustable pressure regulator
Shaft with parallel key (22.22 mm for 29 cm3; 25.38 mm for 45 cm3; 31.75 mm for 73 cm3 and 90 cm3)
Direction of rotation: clockwise rotating

Hints

Version "C" = pump with manual pressure regulator
Version "CH" = pump with manual pressure regulator and pilot pressure relief (venting), 3/2 way solenoid cartridge valve 24 VDC

Article Table

Product Name Weight kg H mm B mm C mm VFU cm³ E mm L mm SAE pressure connection A mm n max. r/min p3max. bar SAE suction connection n min. r/min F mm Ø D mm p2max. bar
Product Name Weight kg H mm B mm C mm VFU cm³ E mm L mm SAE pressure connection A mm n max. r/min p3max. bar SAE suction connection n min. r/min F mm Ø D mm p2max. bar
HK PVPC C 3029 1D 18 88.5 182.7 116.2 29 174 117 3/4" 216 3000 350 1.1/4" 600 146 101.6 280
HK PVPC C 4046 1D 24 97.5 206.0 139.5 46 174 125 1" 248 2600 350 1.1/2" 600 146 101.6 280
HK PVPC C 5073 1D 35 112.5 235.0 158.0 73 213 139 1.1/4" 276 2200 350 2" 600 180 127.0 280
HK PVPC C 5090 1D 35 112.5 235.0 158.0 90 213 139 1.1/4" 276 2200 315 2" 600 180 127.0 250
HK PVPC CH 3029 1D 18 88.5 182.7 116.2 29 174 144 3/4" 216 3000 350 1.1/4" 600 146 101.6 280
HK PVPC CH 4046 1D 24 97.5 206.0 139.5 46 174 153 1" 248 2600 350 1.1/2" 600 146 101.6 280
HK PVPC CH 5073 1D 35 112.5 235.0 158.0 73 213 166 1.1/4" 276 2200 350 2" 600 180 127.0 280
HK PVPC CH 5090 1D 35 112.5 235.0 158.0 90 213 166 1.1/4" 276 2200 315 2" 600 180 127.0 250
VFU = conveying volume per revolution
p2 = working pressure
p3 = maximum pressure
n = speed

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.