HK REM 24

Pressure relief valve with SAE connection and relief valve



Properties

Design SAE flange connector (e.g. for direct fitting to pumps), with magnetic relief valve 24 V; relief with magnet at zero current
Scope of supply incl. SAE flanges and M10 screws
Operating pressure max. 350 bar

Description

Pilot-controlled pressure relief valve with damping plunger
2 pressure adjustment ranges (same min / max values)
Max. volumetric flow 600 l/min
For mineral- based hydraulic oil or synthetic fluids with comparable properties

Hints

These valves must be set according to the application.

Article Table

Product Name Connection Pressure setting range min. bar Pressure setting range max. bar Volumetric flow max. L/min Weight kg
Product Name Connection Pressure setting range min. bar Pressure setting range max. bar Volumetric flow max. L/min Weight kg
HK REM 3 20 350 350 24 SAE flange 3/4" 8 350 200,0 9,2
HK REM 4 20 210 210 24 SAE flange 1" 7 210 400,0 9,2
HK REM 5 20 210 210 24 SAE flange 1.1/4" 7 210 600,0 9,2

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.