HK RH

Non return valve RH

Properties

Design Ball locking
pilot-controlled - single-acting
Type "V" with vale spool
Material Housing: Galvanised steel
Inside parts of steel
Max. operating pressure max. 700 bar

Description

Type HK RH *** V with pre-release, a polished seat valve spool is used with ball check valve. This will pre-opened when unlock, the throttle effect allows a bumpless relaxation of oil volume. Mainly used for high operating pressures and high flow rates.
Pilot pressure ratio see diagram

Article Table

Product Name pmax. bar L mm G A mm AF mm Weight kg Q max. l/min B mm
Product Name pmax. bar L mm G A mm AF mm Weight kg Q max. l/min B mm
HK RH 1 700 84 G 1/4" 31.5 24 0.40 15 27
HK RH 2 700 90 G 3/8" 32.0 27 0.40 35 29
HK RH 3 500 100 G 1/2" 36.5 32 0.60 55 31
HK RH 3V 500 100 G 1/2" 36.5 32 0.60 55 31
HK RH 4 500 126 G 3/4" 45.0 41 1.30 100 36
HK RH 4V 500 126 G 3/4" 45.0 41 1.30 100 36

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.