HK SAB M

Safety and isolation block with manual relief



Properties

Connection for accumulator M33x2
Design Safety valve
Material Gasket: NBR
Additional feature with TÜV certification
Operating pressure max. 350 bar

Description

The safety and isolation block is used to protect, shut off and discharge hydraulic accumulators. It is designed and manufactured in accordance with Directive 2014/68/EU (PED), Article 3 Para. 3 and takes into account the European safety regulations for the operation of hydraulic accumulators. Discharging the accumulator is done manually at a ball valve or a relief valve.
Viscosity of the fluids must lie within the following limits: min. 10 mm2/s, max. 380 mm2/s

Hints

Safety valve is preset; observe the maximum pressure when allocating to the corresponding accumulator!

Article Table

Product Name p max. bar A mm B mm C mm D mm E mm F mm F1 mm G mm M1 M2 P T Weight kg
Product Name p max. bar A mm B mm C mm D mm E mm F mm F1 mm G mm M1 M2 P T Weight kg
HK SAB 10 M 100 N 100 120 98 29 50 24 73 75 101 1/4" 1/4" 1/2" 1/2" 4,2
HK SAB 10 M 200 N 200 120 98 29 50 24 73 75 101 1/4" 1/4" 1/2" 1/2" 4,2
HK SAB 10 M 210 N 210 120 98 29 50 24 73 75 101 1/4" 1/4" 1/2" 1/2" 4,2
HK SAB 10 M 250 N 250 120 98 29 50 24 73 75 101 1/4" 1/4" 1/2" 1/2" 4,2
HK SAB 10 M 330 N 330 120 98 29 50 24 73 75 101 1/4" 1/4" 1/2" 1/2" 4,2
HK SAB 20 M 330 N 330 98 120 39 71 25 73 90 184 1/2" 1/4" 1" 3/4" 6,6

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.