HK SH

Hollow piston cylinder 700 bar



Properties

Design hard chrome-plated pistons, Hardened valvehead, spring return
Scope of supply with female quick coupling 3/8"-18 NPT
Material Steel
Operating pressure max. 700 bar

Description

Hollow piston cylinders are employed for pushing and pulling actuation.
Thread on cylinder housing ensures simple mounting
Plunger wiper seals to prevent soiling
Replaceable supporting head

Hints

Attention: Please observe separate safety precautions for working with 700 bar equipment (see technical information)!

Article Table

Product Name Stroke mm Area cm2 A mm B mm C mm D mm E mm F mm H mm I J mm K mm L mm M N mm R S mm T mm Volume cc Weight kg
Product Name Stroke mm Area cm2 A mm B mm C mm D mm E mm F mm H mm I J mm K mm L mm M N mm R S mm T mm Volume cc Weight kg
HK SH 01204 40 17,6 124 164 20,5 75 55 40 19 2.3/4" -16 30 2,5 55 M28 x 1.5 7 5/16" -18 50,8 12 70 4,0
HK SH 01208 76 17,6 176 252 20,5 75 55 40 19 2.3/4" -16 30 2,5 55 M28 x 1.5 18 5/16" -18 50,8 12 134 4,8
HK SH 02215 150 32,0 318 468 27,0 105 75 56 23 3.7/8" -12 38 2,5 48 1.9/16"-16 8 3/8" -16 83,0 15 474 18,0
HK SH 03006 64 44,0 197 261 33,4 120 90 68 26 4.1/2" -12 42 4,0 55 1.13/16" -16 22 3/8" -16 92,2 17 281 13,2
HK SH 03015 150 44,0 322 472 33,0 120 90 68 26 4.1/2" -12 42 4,0 55 1.13/16" -16 9 3/8" -16 92,0 17 660 23,5
HK SH 06008 76 84,2 253 329 54,0 165 125 95 31 6.1/4" -12 48 4,0 80 2.3/4" -16 22 1/2" -13 130,3 14 640 32,3

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.