HK SMP

Flat cylinders 700 bar single-acting with spring retraction

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design Hardened valvehead, hard chrome-plated pistons, max. stroke 150 mm, spring return
Lieferumfang with female quick coupling 3/8"-18 NPT
Material Steel
Max. operating pressure max. 700 bar

Description

Flat cylinders combine compact design with maximum stroke. Ideal where space is at a premium.
Care must be taken that no lateral forces are transmitted to the guide rings.
Flat
compact design
Mounting bores for stationary applications

Hints

Achtung: Bitte Sicherheitshinweise für Arbeiten mit 700 bar Ausrüstungen beachten (siehe Technische Informationen)!

Article Table

Product Name Druckkraft kN Gewicht kg Hub mm H mm Volumen cm³ B mm D mm A mm Druckkraft t F mm Fläche cm² K mm L mm N mm
Product Name Druckkraft kN Gewicht kg Hub mm H mm Volumen cm³ B mm D mm A mm Druckkraft t F mm Fläche cm² K mm L mm N mm
HKSMP01004 109.0 kN 2.3 kg 40 mm 14 mm 64 cm³ 129 mm 66 mm 89 mm 10 t 36 mm 15.9 cm² 2 mm - -
HKSMP02004 214.0 kN 4.7 kg 40 mm 14 mm 125 cm³ 141 mm 90 mm 101 mm 20 t 56 mm 31.2 cm² 2 mm - -
HKSMP03006 303.0 kN 8.0 kg 60 mm 14 mm 177 cm³ 161 mm 102 mm 121 mm 30 t 60 mm 44.2 cm² 2 mm 45.5 mm 9.0 mm
HKSMP05006 486.0 kN 11.0 kg 60 mm 16 mm 425 cm³ 185 mm 127 mm 125 mm 50 t 80 mm 70.8 cm² 2 mm 61.5 mm 11.5 mm
HKSMP10006 911.0 kN 23.9 kg 60 mm 26 mm 796 cm³ 201 mm 175 mm 141 mm 100 t 110 mm 132.7 cm² 2 mm 88.0 mm 12.0 mm
HKSMP10015 911.0 kN 40.2 kg 150 mm 26 mm 1990 cm³ 404 mm 175 mm 254 mm 100 t 110 mm 132.7 cm² 5 mm 88.0 mm 11.0 mm

Order hints

Für die HK SMP - Modelle von 30 bis 100 t sind bewegliche Druckstücke auf Anfrage erhältlich.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.