HK SMX

Flat cylinders 700 bar single-acting with spring retraction

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design Hardened valvehead
hard chrome-plated pistons
max. stroke 16 mm
spring return
Material Steel
Max. operating pressure max. 700 bar
Scope of supply with female quick coupling 3/8"-18 NPT

Description

Flat cylinders combine compact design with maximum stroke. Ideal where space is at a premium.
Care must be taken that no lateral forces are transmitted to the guide rings.
Flat, compact design
Mounting bores for stationary applications

Hints

Attention: Please observe separate safety precautions for working with 700 bar equipment (see technical information)!

Article Table

Product Name D mm Pressure force kN Stroke mm A mm Volume cm³ R B mm Pressure force t F mm Area cm² Weight kg S mm
Product Name D mm Pressure force kN Stroke mm A mm Volume cm³ R B mm Pressure force t F mm Area cm² Weight kg S mm
HK SMX 00406 41 43.8 6 32.5 4 5.5 38.5 4 25 6.4 0.85 28
HK SMX 00416 41 43.8 16 42.5 11 5.5 58.5 4 25 6.4 1.20 28
HK SMX 01011 56 99.7 11 43.0 16 6.5 54.0 10 38 14.5 1.60 37
HK SMX 02211 80 227.8 11 52.0 37 9.0 63.0 22 57 33.2 2.80 50
HK SMX 03013 95 287.3 13 59.0 55 11.0 72.0 30 60 41.8 4.10 52
HK SMX 05016 114 486.5 16 68.0 114 13.0 84.0 50 78 70.9 6.60 67
HK SMX 07516 140 712.9 16 79.0 167 13.0 95.0 75 95 103.8 12.50 75
HK SMX 10016 158 953.6 16 87.0 223 13.0 103.0 100 108 138.9 15.00 76
HK SMX 15016 194 1450.0 16 100.0 338 13.0 116.0 150 134 211.2 25.00 117

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.