HK STR

Suction filter element

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design without bypass valve
M90: with wire mesh (90 μm), absolute filtration

Description

These filters protect hydraulic pumps from coarse dirt from the tank. They are flush-mounted the tank.
Design (Qmax.) for medium ISO VG 46 <br>at 50°C (30 mm2/s) at Δp = 0.08 bar

Article Table

Product Name H1 mm H mm AF mm Thread Filter area cm² Weight kg Q max. l/min B mm
Product Name H1 mm H mm AF mm Thread Filter area cm² Weight kg Q max. l/min B mm
HK STR 050 1 S M90 10 78 30 G 3/8” 290 0.16 20 52
HK STR 050 2 S M90 10 78 30 G 1/2” 290 0.16 28 52
HK STR 070 1 S M90 10 95 42 G 1/2” 470 0.22 28 70
HK STR 070 2 S M90 10 95 42 G 3/4” 470 0.22 66 70
HK STR 070 3 S M90 10 140 42 G 3/4” 720 0.30 66 70
HK STR 070 4 S M90 10 140 42 G 1" 720 0.30 130 70
HK STR 100 1 S M90 15 135 69 G 1.1/4” 1046 0.47 170 99
HK STR 100 2 S M90 15 225 69 G 1.1/4” 1850 0.68 170 99
HK STR 100 3 S M90 15 225 69 G 1.1/2” 1850 0.68 250 99
HK STR 100 4 S M90 15 225 69 G 2" 1850 0.68 470 99
HK STR 100 5 S M90 15 135 69 G 1.1/2” 1046 0.47 250 99
HK STR 140 2 S M90 15 160 70 G 2" 2000 0.84 470 130
HK STR 140 3 S M90 15 262 70 G 2" 3550 1.25 470 130
HK STR 140 4 S M90 20 270 101 G 2.1/2” 3550 1.25 840 130
HK STR 140 5 S M90 20 270 101 G 3" 3620 1.25 980 130
HK STR 140 6 S M90 20 330 101 G 3" 4160 1.30 980 130
Qmax - max intake volumetric flow

Order hints

Available on request: Other filter mesh sizes, other threads, filter with bypass or magnet

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.