HK SU 3

Pump supports

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Verwendung For European standard gear pumps BG3

Description

Pump supports are employed on gear pumps that are driven e.g. by V-belts or chains and are thus subject to higher radial loads.
A corresponding coupling hub is required for the connection between pump and pump support. (Please order separately!)
Grease according to DIN 51502 is recommended for lubrication.
Connection only for European standard pumps.

Article Table

Product Name für Pumpe Nabe H mm B mm A1 mm G mm D mm E mm C mm A mm Gewicht kg Welle F mm
Product Name für Pumpe Nabe H mm B mm A1 mm G mm D mm E mm C mm A mm Gewicht kg Welle F mm
HKSU3C BG 3 European Standard HK BF 3 8 mm 98.2 mm 120.0 mm 12.0 mm 128 mm 52 mm 150 mm 124.5 mm 2.20 kg Cylindrical dia. 24 48.0 mm
HKSU3D BG 3 European Standard HK BF 3 4 mm 98.2 mm 120.0 mm 12.0 mm 128 mm 52 mm 150 mm 124.5 mm 2.20 kg Conical shaft 1:8 43.0 mm
Hub = required coupling hub, BG2/BG3 - European standard pump

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.