HK TAP 115

Tank venting and filler filters

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design Flange mounting on the tank, with filler screen
with clogging indicator
Material Gasket: NBR
Plastic cap
Steel sieve
Temp. max. 100 °C
Temp. min. -25 °C

Description

To vent hydraulic tanks in systems with large volumetric flows or abrupt changes of the tank volume.

Hints

The given filter mesh size applies for the air filter

Article Table

Product Name Air volume l/min Tank bore Mounting A mm Ø A mm Bolt circle mm Filter mesh size µm Weight kg L mm
Product Name Air volume l/min Tank bore Mounting A mm Ø A mm Bolt circle mm Filter mesh size µm Weight kg L mm
HK TAP115 2 F A03 A1B 2150 51 mm 6 x M5 155 116.00 73 3 0.60 108.0

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.