HK TKO / TKS

Temperature contact for level/temperature switch



Properties

Use for Level-Temperature Switches HK 64EJ
Hysteresis 10 K ± 3 K

Description

For mounting on contact strip of level-temperature switch HK64EJ

Hints

Installation and assembly must be carried out by qualified staff. Level contacts or temperature sensors must be connected to the contact plate clean and free of oil.
For the proper function of the temperature sensors it is important that they have contact to the bottom of the dip tube without air gap. Make sure that the contact plate is inserted completely and fixed in the dip tube.

Article Table

Product Name Switching point °C Voltage Switching function Weight kg
Product Name Switching point °C Voltage Switching function Weight kg
HK TKO 50 RD EJ 50 24 V NC contact 0,01
HK TKO 60 RD EJ 60 24 V NC contact 0,01
HK TKO 70 RD EJ 70 24 V NC contact 0,01
HK TKO 80 RD EJ 80 24 V NC contact 0,01
HK TKS 50 RD EJ 50 24 V NO contact 0,01
HK TKS 60 RD EJ 60 24 V NO contact 0,01
HK TKS 70 RD EJ 70 24 V NO contact 0,01
HK TKS 80 RD EJ 80 24 V NO contact 0,01

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.