HK V0 12

Pressure relief valve V012

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design direct-controlled
Material Inside parts of steel, Housing: Galvanised steel
Max. operating pressure max. 300 bar

Hints

Diese Ventile müssen auf den Anwendungsfall eingestellt werden.
Bei den 1/4" Ventilen ist kein Messanschluss vorgesehen.

Article Table

Product Name L1 mm L mm Anschlüsse P + T H mm Gewicht kg Q max. l/min S mm Druckeinstellbereich bar
Product Name L1 mm L mm Anschlüsse P + T H mm Gewicht kg Q max. l/min S mm Druckeinstellbereich bar
HKV01205003 97 mm 52 mm G 1/4" 30 mm 0.53 kg 25 l/min 40 mm 10 - 50
HKV01218003 97 mm 52 mm G 1/4" 30 mm 0.53 kg 25 l/min 40 mm 10 - 180
HKV01230003 97 mm 52 mm G 1/4" 30 mm 0.53 kg 25 l/min 40 mm 80 - 300
HKV01205006 141 mm 72 mm G 3/8" 40 mm 0.86 kg 40 l/min 40 mm 10 - 50
HKV01210006 141 mm 72 mm G 3/8" 40 mm 0.86 kg 40 l/min 40 mm 20 - 100
HKV01218006 141 mm 72 mm G 3/8" 40 mm 0.86 kg 40 l/min 40 mm 10 - 180
HKV01225006 141 mm 72 mm G 3/8" 40 mm 0.86 kg 40 l/min 40 mm 50 - 250
HKV01230006 141 mm 72 mm G 3/8" 40 mm 0.86 kg 40 l/min 40 mm 80 - 300
HKV01205008 146 mm 77 mm G 1/2" 45 mm 1.10 kg 55 l/min 45 mm 10 - 50
HKV01210008 146 mm 77 mm G 1/2" 45 mm 1.10 kg 55 l/min 45 mm 20 - 100
HKV01218008 146 mm 77 mm G 1/2" 45 mm 1.10 kg 55 l/min 45 mm 10 - 180
HKV01225008 146 mm 77 mm G 1/2" 45 mm 1.10 kg 55 l/min 45 mm 50 - 250
HKV01230008 146 mm 77 mm G 1/2" 45 mm 1.10 kg 55 l/min 45 mm 80 - 300
HKV01205012 161 mm 92 mm G 3/4" 50 mm 1.30 kg 90 l/min 50 mm 10 - 50
HKV01210012 161 mm 92 mm G 3/4" 50 mm 1.30 kg 90 l/min 50 mm 20 - 100
HKV01218012 161 mm 92 mm G 3/4" 50 mm 1.30 kg 90 l/min 50 mm 10 - 180
HKV01225012 161 mm 92 mm G 3/4" 50 mm 1.30 kg 90 l/min 50 mm 50 - 250
HKV01230012 161 mm 92 mm G 3/4" 50 mm 1.30 kg 90 l/min 50 mm 80 - 300

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.