HK V1 601

Line break safety valve without housing



Properties

Material Steel
Operating pressure max. 300 bar

Description

The setting value "S" must correspond to 1.5 times the required volumetric flow for manually switched valves, and 2 times the required volumetric flow for electrically switched valves! Consider also the volumetric flow ratio with double-acting cylinders!

Hints

Note: Line break safety valves must be set according to the application!
The setting value "S" must correspond to 1.5 times the required volumetric flow for manually switched valves, and 2 times the required volumetric flow for electrically switched valves! Consider also the volumetric flow ratio with double-acting cylinders!

Article Table

Product Name A B mm C mm D mm E mm Q max. L/min Tightening torque N-m Weight kg
Product Name A B mm C mm D mm E mm Q max. L/min Tightening torque N-m Weight kg
HK V1 601 0400 G 1/4" 8,0 2,5 8,0 5,0 25 15,0 0,01
HK V1 601 0600 G 3/8" 10,5 3,5 10,5 5,0 50 20,0 0,02
HK V1 601 0800 G 1/2" 13,0 4,5 12,5 5,0 80 40,0 0,02
HK V1 601 1200 G 3/4" 18,0 6,0 16,0 7,0 140 80,0 0,05

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.