HK V2 572

Throttle valve

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design Steel version with precision valve spindle
suitable for control panel installation
Max. operating pressure up to 400 bar

Description

Precise volumetric flow control or barring in both directions
Metallic seal without leakage, linear opening cross-section
Precise throttling over a wide flow rate range
The setting is made via a decimal scale from 0-9 on the underside of the setting knob and a reference scale A to C from 0 to 4 on the valve shaft for exactly reproducible settings
The hex. socket head screw in the setting knob serves for locking
An additional lock nut is available for control panel installation

Hints

These valves must be set according to the application.

Article Table

Product Name Pressure nom. bar C mm D mm A mm Flow rate max. l/min Thread Weight kg B mm
Product Name Pressure nom. bar C mm D mm A mm Flow rate max. l/min Thread Weight kg B mm
HK V2 572-1/8 400 16 13.5 38 8 G 1/8” 0.11 64
HK V2 572-1/4 400 20 17.0 49 14 G 1/4" 0.20 78
HK V2 572-3/8 400 25 19.5 59 38 G 3/8" 0.38 93
HK V2 572-1/2 400 30 21.0 68 50 G 1/2” 0.60 107
HK V2 572-3/4 400 40 26.5 86 80 G 3/4" 1.25 132
HK V2 572-1 320 50 35.0 105 190 G 1" 2.55 167
HK V2 572-1 1/4 320 55 35.0 120 200 G 1.1/4” 3.00 172
HK V2 572-11/2 320 65 35.0 134 350 G 1.1/2” 4.22 181
HK V2 572-2 320 75 44.0 150 450 G 2" 7.30 202
Values for max. flow rate at Δp = 20 bar

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.