HK V2 765 Z

Flow-control non-return valveV765Z

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3


Design Ball locking
Material Housing: Cast iron, Inside parts of steel
Max. operating pressure max. 300 bar
Media Mineral oil


Diese Ventile müssen auf den Anwendungsfall eingestellt werden

Article Table

Product Name p max. bar D mm L mm G Gewicht kg Q max. l/min
Product Name p max. bar D mm L mm G Gewicht kg Q max. l/min
HKV2765Z400 300 bar 34 mm 66 mm G 1/4" 0.27 kg 20 l/min
HKV2765Z600 300 bar 36 mm 77 mm G 3/8" 0.33 kg 45 l/min
HKV2765Z800 300 bar 42 mm 80 mm G 1/2" 0.49 kg 70 l/min
HKV2765Z1000 250 bar 51 mm 95 mm G 3/4" 0.83 kg 110 l/min


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.