HK V7 667

6/3-way changeover valve

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design Type A - mid-position open, Type C - mid-position closed
Material Housing: cast iron, inner parts steel

Hints

Drehschieberventile sind allseits druckbeaufschlagbar und haben auf Grund ihrer Bauart geringe innere Leckagen

Article Table

Product Name i mm b mm Gewicht kg L mm Anschl├╝sse c mm Druck max. bar e mm f mm a mm Q max. l/min
Product Name i mm b mm Gewicht kg L mm Anschl├╝sse c mm Druck max. bar e mm f mm a mm Q max. l/min
HKV7667A06 36 mm 73 mm 1.7 kg 110 mm 3/8" 8.5 mm 250 bar 42 mm 124 mm 24 mm 40 l/min
HKV7667A08 43 mm 85 mm 2.9 kg 120 mm 1/2" 11.0 mm 250 bar 53 mm 140 mm 30 mm 60 l/min
HKV7667A12 47 mm 91 mm 3.7 kg 125 mm 3/4" 11.0 mm 220 bar 54 mm 160 mm 32 mm 120 l/min
HKV7667A16 51 mm 98 mm 5.2 kg 130 mm 1" 11.0 mm 220 bar 64 mm 180 mm 32 mm 180 l/min
HKV7667C06 36 mm 73 mm 1.7 kg 110 mm 3/8" 8.5 mm 250 bar 42 mm 124 mm 24 mm 40 l/min
HKV7667C08 43 mm 85 mm 2.9 kg 120 mm 1/2" 11.0 mm 250 bar 53 mm 140 mm 30 mm 60 l/min
HKV7667C12 47 mm 91 mm 3.7 kg 125 mm 3/4" 11.0 mm 220 bar 54 mm 160 mm 32 mm 120 l/min
HKV7667C16 51 mm 98 mm 5.2 kg 130 mm 1" 11.0 mm 220 bar 64 mm 180 mm 32 mm 180 l/min

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.