HK V7 867

8/3-way changeover valve



Properties

Design Type A - mid-position open, Type C - mid-position closed
Material Housing: cast iron, inner parts steel

Hints

Rotary slide valves can be pressurised from all sides and are designed to have less internal leakage

Article Table

Product Name Pressure max. bar Connections Q max. L/min a mm b mm c mm e mm f mm i mm L mm Weight kg
Product Name Pressure max. bar Connections Q max. L/min a mm b mm c mm e mm f mm i mm L mm Weight kg
HK V7 867 A06 250 3/8" 35 54 77 8,5 38,5 142 38,5 110 2,5
HK V7 867 A08 250 1/2" 50 68 90 8,5 45,0 160 45,0 120 3,8
HK V7 867 A12 220 3/4" 90 74 95 8,5 47,5 180 47,5 125 5,2
HK V7 867 C06 250 3/8" 35 54 77 8,5 38,5 142 38,5 110 2,5
HK V7 867 C08 250 1/2" 50 68 90 8,5 45,0 160 45,0 120 3,8
HK V7 867 C12 220 3/4" 90 74 95 8,5 47,5 180 47,5 125 5,2

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.