HK VMP BL

VMP BL pressure relief valve

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design direct-controlled
Material Inside parts of steel
Max. operating pressure max. 350 bar

Hints

These valves must be set according to the application.

Article Table

Product Name Connections P + T Setting Q max. l/min Pressure setting range bar Material B mm D mm E mm A mm G mm Z mm Depth mm F mm Weight kg
Product Name Connections P + T Setting Q max. l/min Pressure setting range bar Material B mm D mm E mm A mm G mm Z mm Depth mm F mm Weight kg
HK VMP BL 03 14 V G 1/4" Handwheel 10 50 - 220 Aluminium 60 48 14 60 32 6.5 30 30 0.42
HK VMP BL 05 38 V G 3/8" Handwheel 35 50 - 220 Aluminium 70 35 18 60 34 6.5 35 48 0.48
HK VMP BL 10 12 V G 1/2" Handwheel 60 50 - 220 Aluminium 78 39 20 70 40 6.5 35 58 0.52
HK VMP BL 20 34 V G 3/4" Handwheel 100 50 - 220 Aluminium 100 50 22 70 57 8.5 50 54 0.67
HK VMP BL 20 100 V G 1" Handwheel 100 50 - 220 Aluminium 120 63 30 85 65 8.5 60 65 0.86
HK VMP BL 05 38 SV G 3/8" Handwheel 35 180 - 350 Steel 70 35 18 60 34 6.5 35 48 0.60
HK VMP BL 10 12 S V G 1/2" Handwheel 60 180 - 350 Steel 78 39 20 70 40 6.5 35 58 1.00
HK VMP BL 20 100 S V G 1" Handwheel 100 180 - 350 Steel 120 63 30 85 65 8.5 60 65 4.50
HK VMP BL 20 100 G 1" Screw 100 50 - 220 Aluminium 120 63 30 85 65 8.5 60 65 0.86
HK VMP BL 20 100 S G 1" Screw 100 180 - 350 Steel 120 63 30 85 65 8.5 60 65 4.80
Material applies to the housing

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.