HK VRDE

VRDE non-return valve for cylinder installation

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design Cone locking
pilot-controlled - double-acting
Direct flange mounting on cylinder
Material Steel housing
Max. operating pressure max. 300 bar
Scope of supply incl. hollow screw and gaskets

Hints

Recommended minimum distance of cylinder oil connections: 144 mm for HK VRDE 10 CIL / 150 mm for HK VRDE 20 CIL

Article Table

Product Name Connection A1, A2, B1 Hollow screw B2 Opening pressure nom. bar Q max. l/min C mm B mm D mm E mm A mm G mm F mm Weight kg Level control ratio
Product Name Connection A1, A2, B1 Hollow screw B2 Opening pressure nom. bar Q max. l/min C mm B mm D mm E mm A mm G mm F mm Weight kg Level control ratio
HK VRDE 10 CIL G 1/4” - IG 1/4" AG 0.6 20 68.5 84 24 40 88.5 10 27 0.62 1:4.5
HK VRDE 20 CIL G 3/8” - IG 3/8" AG 0.6 20 72.0 86 26 45 90.5 12 31 0.62 1:4.9

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.