HK WAPR

Pivot yoke with regreasable bearings

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design clampable
Material Steel ST 52.3

Article Table

Product Name LF mm d1 mm d mm S mm d4 mm i mm L1 mm allowable dyn. load kN L mm S2 mm d3 mm F S1 mm d2 mm Weight kg
Product Name LF mm d1 mm d mm S mm d4 mm i mm L1 mm allowable dyn. load kN L mm S2 mm d3 mm F S1 mm d2 mm Weight kg
HK WAPR 020 U 17 56 20 16 24 50 25 30 80 17 25 M 16x1.5 19 46 0.44
HK WAPR 025 U 17 56 25 20 29 50 28 48 80 21 25 M 16x1.5 23 46 0.47
HK WAPR 030 U 23 64 30 22 34 60 30 62 94 26 32 M 22x1.5 28 50 0.77
HK WAPR 035 U 29 78 35 25 40 70 38 80 112 28 40 M 28x1.5 30 66 1.24
HK WAPR 040 U 36 94 40 28 45 85 45 100 135 33 49 M 35x1.5 35 76 2.12
HK WAPR 050 U 46 117 50 35 56 105 55 156 168 37 61 M 45x1.5 40 90 3.74
HK WAPR 060 U 59 130 60 44 67 130 65 245 200 46 75 M 58x1.5 50 120 6.49
HK WAPR 070 U 66 154 70 49 79 150 75 315 232 51 86 M 65x1.5 55 130 9.80
HK WAPR 080 U 81 176 80 55 89 170 80 400 265 55 105 M 80x2 60 160 14.40
HK WAPR 090 U 101 206 90 60 98 210 90 490 322 60 124 M 100x2 65 180 23.50

Order hints

Further sizes and types of pivot bearing available on request.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.