HK W / HK X

Hand pump 700 bar



Properties

Connections 3/8" Female NPT
Design internal pressure control valve
Operating pressure max. 700 bar

Description

The use of 2-stage pumps is recommended for cylinders with large oil volumes.
Hand lever can be used as carrying handle after locking.

Hints

"W" hand pumps for actuation of single-acting cylinders, one port
"X" hand pumps with control valve for actuation of double-acting cylinders, two ports
Attention: Please observe separate safety precautions for working with 700 bar equipment (see technical information)!

Article Table

Product Name useful oil volume cc Levels Volume level 1 max. cc Volume level 2 max. cc Pressure level 1 max. bar Pressure level 2 max. bar A mm B mm C mm D mm E mm Weight kg
Product Name useful oil volume cc Levels Volume level 1 max. cc Volume level 2 max. cc Pressure level 1 max. bar Pressure level 2 max. bar A mm B mm C mm D mm E mm Weight kg
HK W 10707 660,0 1 2,6 - 700 - 500 100 150 40 560 5,0
HK W 20707 660,0 2 8,1 2,0 20 700 500 100 150 40 560 5,0
HK W 11207 1200,0 1 2,6 - 700 - 545 100 175 40 560 6,0
HK W 21207 1200,0 2 8,1 2,0 20 700 545 100 175 40 560 6,0
HK W 22307 2200,0 2 13,2 2,2 20 700 560 106 210 55 560 11,0
HK X 02307 2200,0 2 13,2 2,2 20 700 625 106 210 55 560 14,0

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.