Pneumo-hydraulic pump 700 bar

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3


Connections air connection 1/4" NPT Female
Air connection 1/4" female NPT
Design double-acting with control valve
internal pressure control valve
Material Housing: Plastic
Max. operating pressure max. 700 bar
Use For actuation of 700 bar cylinders


Pneumo-hydraulic pumps develop an oil pressure of 700 bar with an air pressure of only 7 bar
Pump maintains the pressure in rest position
Actuation of the pedal by hand or foot


Attention: Please observe separate safety precautions for working with 700 bar equipment (see technical information)!

Article Table

Product Name Weight kg Pressure max. bar Type useful oil volume cm³
Product Name Weight kg Pressure max. bar Type useful oil volume cm³
HK Z 12107 7.5 700 single-acting 2100.0
HK Z 22107 7.0 700 double-acting 2100.0
HK Z 14007 14.4 700 single-acting 4000.0


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.