IBU

Rod seal, IBU

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Colour blue / brown
Design rod seal
Material (1) seal: PU10, (2) Support ring: POM
Max. operating pressure up to 500 bar
Sliding speed max. 0.5 m/s
Temp. max. 100 °C
Temp. min. -40 °C

Description

As buffer seal.
Easy assembly.
Easy installation space at the same time small dimensions.
High abrasion resistance.
Good extrusion resistance.
High temperature resistance.

Hints

Spaltmaß e bis maximal 0,3 mm

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
IBU60 75 mm 60 mm 9.5 mm
IBU65 80 mm 65 mm 9.5 mm
IBU70 85 mm 70 mm 9.5 mm
IBU75 90 mm 75 mm 9.5 mm
IBU80 95 mm 80 mm 9.5 mm
IBU90 105 mm 90 mm 9.5 mm

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.