IGR B

Rod seal IGR-B

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Anwendung Hydraulics
Design Rod packing set
Installation first bend the O-ring and then the PTFE ring into a kidney shape, and press into the locating groove (from 30 mm).
Material (1) Dynamic seal: PTBR, (2) Static seal: NBR
Max. operating pressure up to 700 bar
Media Mineral oil, Water emulsions
Online-Shop https://shop.hansa-flex.com/de/IGRB
Sliding speed max. 15.0 m/s
Temp. max. 110 °C
Temp. min. -30 °C

Description

Low spatial requirement.
High extrusion resistance.
low break-loose torque and dynamic friction
Long service life.

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
IGR0050B554470 9.9 mm 5 mm 2.2 mm
IGR0080B554470 15.3 mm 8 mm 3.2 mm
IGR0100B554470 17.3 mm 10 mm 3.2 mm
IGR0120B554470 19.3 mm 12 mm 3.2 mm
IGR0140B554470 21.3 mm 14 mm 3.2 mm
IGR0150B554470 22.3 mm 15 mm 3.2 mm
IGR0160B554470 23.3 mm 16 mm 3.2 mm
IGR0180B554470 25.3 mm 18 mm 3.2 mm
IGR0200B554470 30.7 mm 20 mm 4.2 mm
IGR0220B554470 32.7 mm 22 mm 4.2 mm
IGR0240B554470 34.7 mm 24 mm 4.2 mm
IGR0250B554470 35.7 mm 25 mm 4.2 mm
IGR0280B554470 38.7 mm 28 mm 4.2 mm
IGR0300B554470 40.7 mm 30 mm 4.2 mm
IGR0320B554470 42.7 mm 32 mm 4.2 mm
IGR0350B554470 45.7 mm 35 mm 4.2 mm
IGR0360B554470 46.7 mm 36 mm 4.2 mm
IGR0370B554470 47.7 mm 37 mm 4.2 mm
IGR0380B554470 53.1 mm 38 mm 6.3 mm
IGR0400B554470 55.1 mm 40 mm 6.3 mm
IGR0420B554470 57.1 mm 42 mm 6.3 mm
IGR0450B554470 60.1 mm 45 mm 6.3 mm
IGR0480B554470 63.1 mm 48 mm 6.3 mm
IGR0500B554470 65.1 mm 50 mm 6.3 mm
IGR0550B554470 70.1 mm 55 mm 6.3 mm
IGR0560B554470 71.1 mm 56 mm 6.3 mm
IGR0600B554470 75.1 mm 60 mm 6.3 mm
IGR0630B554470 78.1 mm 63 mm 6.3 mm
IGR0650B554470 80.1 mm 65 mm 6.3 mm
IGR0700B554470 85.1 mm 70 mm 6.3 mm
IGR0750B554470 90.1 mm 75 mm 6.3 mm
IGR0800B554470 95.1 mm 80 mm 6.3 mm
IGR0850B554470 100.1 mm 85 mm 6.3 mm
IGR0900B554470 105.1 mm 90 mm 6.3 mm
IGR0950B554470 110.1 mm 95 mm 6.3 mm
IGR1000B554470 115.1 mm 100 mm 6.3 mm
IGR1050B554470 120.1 mm 105 mm 6.3 mm
IGR1100B554470 125.1 mm 110 mm 6.3 mm
IGR1150B554470 130.1 mm 115 mm 6.3 mm
IGR1200B554470 135.1 mm 120 mm 6.3 mm
IGR1250B554470 140.1 mm 125 mm 6.3 mm
IGR1300B554470 145.1 mm 130 mm 6.3 mm
IGR1400B554470 155.1 mm 140 mm 6.3 mm
IGR1500B554470 165.1 mm 150 mm 6.3 mm
IGR1600B554470 175.1 mm 160 mm 6.3 mm
IGR1700B554470 185.1 mm 170 mm 6.3 mm
IGR1800B554470 195.1 mm 180 mm 6.3 mm
IGR1900B554470 205.1 mm 190 mm 6.3 mm
IGR2000B554470 220.5 mm 200 mm 8.1 mm
IGR2200B554470 240.5 mm 220 mm 8.1 mm
IGR2500B554470 270.5 mm 250 mm 8.1 mm
IGR2800B554470 304.0 mm 280 mm 8.1 mm
IGR3600B554470 384.0 mm 360 mm 8.1 mm

Order hints

IGR / IGRL-Dichtungen mit Durchmesser 20 bis 510 mm können wir kurzfristig anfertigen. Abmessungen können nach Tabelle 44.1 errechnet werden.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.