Rod seal IGRL-B

  • Image_1 Image_1
  • Image_2 Image_2


Anwendung Hydraulics
Design Rod packing set
Installation first bend the O-ring and then the PTFE ring into a kidney shape, and press into the locating groove (from 30 mm).
Material (1) Dynamic seal: PTBR, (2) Static seal: NBR
Max. operating pressure up to 700 bar
Media Mineral oil, Water emulsions
Online-Shop https://shop.hansa-flex.com/de/IGRLB
Sliding speed max. 15.0 m/s
Temp. max. 110 °C
Temp. min. -30 °C


Low spatial requirement.
High extrusion resistance.
low break-loose torque and dynamic friction
Long service life.

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
IGRL0200B554470 27.3 mm 20 mm 3.2 mm
IGRL0220B554470 29.3 mm 22 mm 3.2 mm
IGRL0250B554470 32.3 mm 25 mm 3.2 mm
IGRL0280B554470 35.3 mm 28 mm 3.2 mm
IGRL0300B554470 37.3 mm 30 mm 3.2 mm
IGRL0350B554470 42.3 mm 35 mm 3.2 mm
IGRL0360B554470 43.3 mm 36 mm 3.2 mm
IGRL0400B554470 50.7 mm 40 mm 4.2 mm
IGRL0450B554470 55.7 mm 45 mm 4.2 mm
IGRL0500B554470 60.7 mm 50 mm 4.2 mm
IGRL0550B554470 65.7 mm 55 mm 4.2 mm
IGRL0560B554470 66.7 mm 56 mm 4.2 mm
IGRL0600B554470 70.7 mm 60 mm 4.2 mm
IGRL0650B554470 75.7 mm 65 mm 4.2 mm
IGRL0700B554470 80.7 mm 70 mm 4.2 mm
IGRL0800B554470 90.7 mm 80 mm 4.2 mm
IGRL0900B554470 100.7 mm 90 mm 4.2 mm
IGRL1000B554470 110.7 mm 100 mm 4.2 mm
IGRL1300B554470 140.7 mm 130 mm 4.2 mm

Order hints

IGR / IGRL-Dichtungen mit Durchmesser 20 bis 510 mm können wir kurzfristig anfertigen. Abmessungen können nach Tabelle 44.1 errechnet werden.


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.