I-GTP1 A

Rod guide I-GTP1



Properties

Design Guide ring
Media Mineral oils, Water emulsions
Surface pressure 50 N/mm2
Installation insert into the groove

Description

Easy working of the fitting groove and assembly.
High load-bearing capacity.
Low coefficient of friction (PTFE).
No water absorption.
Long service life.

Hints

Calculation of shear force; F= p x D x L x n
F= maximum shear force (N)
p = maximum surface pressure (N/mm2)
D x L= projected area (mm2)
n= quantity of rings

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
IGTP1 250 630 220 A 27 22 6,3
IGTP1 250 560 250 A 30 25 5,6
IGTP1 250 630 250 A 30 25 6,3
IGTP1 250 970 250 A 30 25 9,7
IGTP1 250 560 280 A 33 28 5,6
IGTP1 250 630 280 A 33 28 6,3
IGTP1 250 560 300 A 35 30 5,6
IGTP1 250 970 300 A 35 30 9,7
IGTP1 250 560 320 A 37 32 5,6
IGTP1 250 630 320 A 37 32 6,3
IGTP1 250 970 320 A 37 32 9,7
IGTP1 250 560 350 A 40 35 5,6
IGTP1 250 560 360 A 41 36 5,6
IGTP1 250 630 360 A 41 36 6,3
IGTP1 250 970 360 A 41 36 9,7
IGTP1 251 500 360 A 41 36 15,0
IGTP1 250 560 400 A 45 40 5,6
IGTP1 250 970 400 A 45 40 9,7
IGTP1 250 560 450 A 50 45 5,6
IGTP1 250 970 450 A 50 45 9,7
IGTP1 252 000 450 A 50 45 20,0
IGTP1 252 500 450 A 50 45 25,0
IGTP1 250 560 500 A 55 50 5,6
IGTP1 250 970 500 A 55 50 9,7
IGTP1 251 500 500 A 55 50 15,0
IGTP1 252 000 500 A 55 50 20,0
IGTP1 250 560 550 A 60 55 5,6
IGTP1 250 970 550 A 60 55 9,7
IGTP1 251 500 550 A 60 55 15,0
IGTP1 250 560 560 A 61 56 5,6
IGTP1 250 970 560 A 61 56 9,7
IGTP1 251 500 560 A 61 56 15,0
IGTP1 250 560 600 A 65 60 5,6
IGTP1 250 970 600 A 65 60 9,7
IGTP1 251 500 600 A 65 60 15,0
IGTP1 250 970 630 A 68 63 9,7
IGTP1 250 560 650 A 70 65 5,6
IGTP1 250 970 650 A 70 65 9,7
IGTP1 252 000 650 A 70 65 20,0
IGTP1 250 560 700 A 75 70 5,6
IGTP1 250 970 700 A 75 70 9,7
IGTP1 251 500 700 A 75 70 15,0
IGTP1 252 000 700 A 75 70 20,0
IGTP1 200 810 750 A 80 75 8,1
IGTP1 250 560 750 A 80 75 5,6
IGTP1 250 630 750 A 80 75 6,3
IGTP1 250 970 750 A 80 75 9,7
IGTP1 252 000 750 A 80 75 20,0
IGTP1 250 560 800 A 85 80 5,6
IGTP1 250 970 800 A 85 80 9,7
IGTP1 251 500 800 A 85 80 15,0
IGTP1 252 500 800 A 85 80 25,0
IGTP1 250 560 850 A 90 85 5,6
IGTP1 250 970 850 A 90 85 9,7
IGTP1 251 500 850 A 90 85 15,0
IGTP1 250 970 900 A 95 90 9,7
IGTP1 251 500 900 A 95 90 15,0
IGTP1 252 500 900 A 95 90 25,0
IGTP1 250 970 950 A 100 95 9,7
IGTP1 251 500 950 A 100 95 15,0
IGTP1 252 000 950 A 100 95 20,0
IGTP1 252 500 950 A 100 95 25,0
IGTP1 250 971 000 A 105 100 9,7
IGTP1 251 501 000 A 105 100 15,0
IGTP1 252 001 000 A 105 100 20,0
IGTP1 252 501 000 A 105 100 25,0
IGTP1 250 971 100 A 115 110 9,7
IGTP1 251 501 100 A 115 110 15,0
IGTP1 252 501 100 A 115 110 25,0

Order hints

We are able to produce guide rings with diameters of 20 to 1,200 mm with short lead times.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.