I-GTP A

Rod guide I-GTP



Properties

Design Guide ring
Media Mineral oils
Material phenol resin-cotton fabric
Surface pressure 35 N/mm2
Installation insert into the groove

Description

Easy working of the fitting groove and assembly.
Low coefficient of friction.
High load-bearing capacity.

Hints

Calculation of shear force; F= p x D x L x n
F= maximum shear force (N)
p = maximum surface pressure (N/mm2)
D x L= projected area (mm2)
n= quantity of rings

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
IGTP 250 560 280 A 33 28 5,6
IGTP 250 970 550 A 60 55 9,7
IGTP 251 300 600 A 65 60 13,0
IGTP 251 500 500 A 55 50 15,0
IGTP 251 500 700 A 75 70 15,0
IGTP 251 500 800 A 85 80 15,0
IGTP 251 500 850 A 90 85 15,0
IGTP 251 500 900 A 95 90 15,0
IGTP 251 501 150 A 120 115 15,0
IGTP 251 520 700 A 75 70 15,2
IGTP 251 520 800 A 85 80 15,2
IGTP 251 520 900 A 95 90 15,2
IGTP 251 521 200 A 125 120 15,2
IGTP 251 600 650 A 70 65 16,0
IGTP 251 600 700 A 75 70 16,0
IGTP 251 600 800 A 85 80 16,0
IGTP 255 020 700 A 75 70 50,2
IGTP 255 020 800 A 85 80 50,2
IGTP 255 020 900 A 95 90 50,2
IGTP 256 021 000 A 105 100 60,2
IGTP 256 521 100 A 115 110 65,2
IGTP 257 021 200 A 125 120 70,2

Order hints

We are able to produce guide rings with diameters of 20 to 1,200 mm with short lead times.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.