INDU WAS SD

Suction pressure water hose


Properties

Outer layer synthetic rubber
Insert highly tear-resistant synthetic textile insert and steel wire spiral
Application Industry and construction, Low pressure suction and pressure systems
Colour black
Inner layer Natural and synthetic rubber
Media Water
Standard ISO 1307

Description

suitable for use as a suction/pressure hose

Article Table

Product Name Inches Internal Ø mm External Ø mm Wall thickness mm Operating pressure bar Burst pressure bar Vacuum bar Min. bending radius mm Roll length m
Product Name Inches Internal Ø mm External Ø mm Wall thickness mm Operating pressure bar Burst pressure bar Vacuum bar Min. bending radius mm Roll length m
INDU WAS 25-5 SD 1" 25,4 35 5,0 10,0 30 0,93 153 40
INDU WAS 32-5 SD 1.1/4" 32,0 42 5,0 10,0 30 0,93 192 40
INDU WAS 38-5 SD 1.1/2" 38,0 48 5,0 10,0 30 0,93 228 40
INDU WAS 45-5 SD 1.3/4" 44,5 55 5,0 10,0 30 0,93 267 40
INDU WAS 51-5.5 SD 2" 51,0 62 5,5 10,0 30 0,93 306 40
INDU WAS 63-6 SD 2.1/2" 63,5 75 6,0 10,0 30 0,93 381 40
INDU WAS 70-8 SD 2.3/4" 70,0 86 8,0 10,0 30 0,93 420 40
INDU WAS 76-6.5 SD 3" 75,0 89 7,0 10,0 30 0,93 458 40
INDU WAS 102-6.5 SD 4" 101,6 115 6,5 10,0 30 0,93 610 40
INDU WAS 127-8.5 SD 5" 127,0 144 8,5 10,0 30 0,93 762 40
INDU WAS 152-8.5 SD 6" 152,4 169 8,5 10,0 30 0,93 915 40
INDU WAS 203-10.5 SD 8" 203,2 224 10,5 10,0 30 0,93 1219 40
INDU WAS 254-16 SD 10" 254,0 275 16,0 10,0 30 0,93 1524 40

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.