KLIMA

Universal coolant hose


Properties

Outer layer 70% lower than required according to SAEJ2064, Butyl group = Moisture absorption values
Insert polyester braid
Application Coolant (air conditioning technology)
Colour black
Inner layer Polyamide = R134a effusion values 75% lower than required according to SAEJ2064
Media Compressor oils: PAG, ester, mineral oil, alkyl benzene, Coolants: R134a, R404a
Standard exceeds SAEJ2064 Type E
Rubber intermediate layer 70% lower than required according to SAEJ2064, Butyl group = Moisture absorption values;

Article Table

Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Burst pressure bar Min. bending radius mm
Product Name DN* Size Inches Internal Ø mm External Ø mm Operating pressure bar Burst pressure bar Min. bending radius mm
KLIMA 04 5 3 3/16" 5,1 11,2 35,0 175 40
KLIMA 08 8 5 5/16" 8,0 14,9 35,0 175 51
KLIMA 10 10 6 3/8" 10,5 17,9 35,0 175 63
KLIMA 13 12 8 1/2" 13,1 19,9 35,0 175 76
KLIMA 16 16 10 5/8" 16,3 24,8 35,0 175 101
KLIMA 20 19 12 3/4" 22,6 30,6 35,0 140 178
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.