KOMP G

Compressor hose


Properties

Outer layer Natural and synthetic rubber, abrasion, ozone and weather resistant
Special features smooth outer cover
Insert highly tear-resistant synthetic textile insert
Application Compressors, Mining
Colour yellow
Inner layer Natural and synthetic rubber
Media Compressed air

Article Table

Product Name Inches Internal Ø mm External Ø mm Wall thickness mm Operating pressure bar Burst pressure bar Min. bending radius mm Roll length m
Product Name Inches Internal Ø mm External Ø mm Wall thickness mm Operating pressure bar Burst pressure bar Min. bending radius mm Roll length m
KOMP 13-5 G 1/2" 13,0 23 5,0 20,0 60 125 40
KOMP 19-5 G 3/4" 19,0 29 5,0 20,0 60 190 40
KOMP 19-6 G 3/4" 19,0 31 6,0 20,0 60 190 40
KOMP 25-5.5 G 1" 25,4 36 5,5 20,0 60 254 40
KOMP 25-7 G 1" 25,4 39 7,0 20,0 60 254 40
KOMP 32-6 G 1.1/4" 32,0 44 6,0 20,0 60 260 40
KOMP 38-5 G 1.1/2" 38,0 48 5,0 20,0 60 380 40
KOMP 38-7 G 1.1/2" 38,0 52 7,0 20,0 60 380 40
KOMP 51-7.5 G 2" 50,8 66 7,5 20,0 60 510 40
KOMP 63-10 G 2.1/2" 63,5 84 10,0 20,0 60 480 40
KOMP 75-9 G 3" 76,2 92 9,0 20,0 60 762 40

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.