KOMP T

Compressor hose

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area for compressors, in harsh operating conditions in mining,, quarrying, construction, shipyards, petrol stations, Low pressure range
Besondere Merkmale electrical resistance R less than 10,000,000 Ohm, free from LABS, separating agents and grease
Colour black with blue stripes
Inner layer NBR
Insert synthetic yarn braids
Media Water, Compressed air containing oil mist
Online-Shop https://shop.hansa-flex.com/de/KOMPT
Outer layer NBR
Standard DIN 20018, EN ISO 2398
Temp. max. 70 °C
Temp. min. -40 °C

Article Table

Product Name Einheit Rollenlänge m Betriebsdruck bar Nur als volle Rollenlänge bestellbar? Außen-Ø mm Zoll Wandstärke mm Innen-Ø mm Biegeradius min. mm
Product Name Einheit Rollenlänge m Betriebsdruck bar Nur als volle Rollenlänge bestellbar? Außen-Ø mm Zoll Wandstärke mm Innen-Ø mm Biegeradius min. mm
KOMP19-6T Reel 40 25.0 bar Yes 31 mm 3/4" 6 mm 19 mm 95 mm
KOMP25-7T Reel 40 25.0 bar Yes 39 mm 1" 7 mm 25 mm 125 mm

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.