KP 100 P

HD hose, compact, Pilot

  • Image_1 Image_1

Properties

Application area Medium pressure circuits with restricted installation spaces, Pre-control hoses, Return hoses
Besondere Merkmale narrow bending radius, kink resistant
Colour black
Inner layer oil resistant synthetic rubber
Insert one high tensile steel wire braided insert
Media Mineral oil, Polyglycol based oil, Water (0°C to + 70°C), Water-oil emulsions
Online-Shop https://shop.hansa-flex.com/de/KP100P
Outer layer environmentally safe synthetic rubber
Temp. max. 100 °C
Temp. min. -40 °C

Article Table

Product Name Außen-Ø nom. mm Innen-Ø nom. mm DN* Betriebsdruck bar Zoll Berstdruck bar Size Biegeradius min. mm
Product Name Außen-Ø nom. mm Innen-Ø nom. mm DN* Betriebsdruck bar Zoll Berstdruck bar Size Biegeradius min. mm
KP106P 11.5 mm 6.4 mm 6 120.0 bar 1/4" 480 bar 4 30 mm
KP108P 13.1 mm 7.9 mm 8 120.0 bar 5/16" 480 bar 5 40 mm
KP110P 14.8 mm 9.5 mm 10 100.0 bar 3/8" 400 bar 6 50 mm
KP113P 18.0 mm 12.7 mm 12 100.0 bar 1/2" 400 bar 8 60 mm
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.